Fwd: Subaru will not start, towing to

Middletown, NY -

 

Fuel pumps go bad. It just happens, right? But why, that's what good mechanics want to find, the root of the problems.

You know what has not changed with new cars? Preventive maintenance. Following a schedule, repairing things before they cause problems is the key to avoiding tow trucks.

In this case the fuel filter was plugged and blew out part of the fuel pump system as seen here. Can you spot the point of failure?

If you know what to look for you can see that a backup of flow causes higher than specified pressure. That high pressure caused damage to a part inside the fuel tank mounted pump assembly.

If that fuel system was maintained this may not have broken down on the road or I-84 near Middletown NY. We can bring your car up to it's maintenance schedule today, it's usually not a lengthy and much less in price than a breakdown. www.doksontire.com

178 Dolson Ave

Middletown NY 10940

343-6300

Alignment Lifted Trucks 4x4

Middletown NY-

4 wheel drive trucks and SUV vehicles require additional time and work to properly bring the tires relationship with the surface into specification.

Different lift kits available for many trucks in stock at everything from low prices to the best engineered brands require careful consideration when it comes to installation and alignment.

Here at Dolson Auto we are re setting an alignment gone wrong, where the chain store had not only forgotten a few steps but damaged the key pin required to retain the cams. Once the pin is missing from the control arm brackets (because it was hammered out with possibly an air hammer?) a new pin would have to be fabricated and welded in. Fortunately there are two pins, one on each side of the bracket saving this client some cost unless the one pin cant hold the cam steady over time. 

We repaired what could be done and reset every angle using Tru-align plate systems coupled with Hunter alignment sensors. Removing rust is a common issue and often these bolts are rusted and stuck. Once loose we oil them to make it easier and resist rust in the future (for the next guy).

Setting lifted trucks is an art and practice as much as science. Often some period of testing and adjustments is required to balance driveability with what the manufacturer wants and real world road feel. Tire life may be a trade off with some drivers desired specifications. Occasionally lifted trucks have thrust line issues and the steering wheel may need to be reset . 

A professional alignment technician will charge for his time by the hour and that's a fair method, after all most people get paid by the hour and on these trucks it may go quickly or it may take time, no one knows until they complete the work. Most will not offer a warranty on custom alignment because these vehicles might get used for their design purpose. Dolson offers a warranty that they will re check and ensure the desired specifications are good for 30 days, by the end of that time you will have enough wheel time to know it feels good! They want you to be happy and if your Jeep or Humvee needs alignment check out www.dolsontire.com
<script async src="//pagead2.googlesyndication.com/pagead/js/adsbygoogle.js"></script> <script> (adsbygoogle = window.adsbygoogle || []).push({ google_ad_client: "ca-pub-6178000753050891", enable_page_level_ads: true }); </script>

Window tint law in NY? What is the scoop with ....

Even the lightest tints seem to be unable to pass the new NY State Tin Law Section 375 (12-a) of the NYS Vehicle and Traffic Law  - which does not allow a windshield or front side windows that are dark. The windshield and front side windows cannot block more than 30% of the light. Seventy percent or more of the light from the outside must pass through the window effective Jan 1, 2017.

Not only can you receive a ticket by an officer, but also it will not be able to pass inspection. Due to the factory windows on most cars having a tint that varies by brand it has been difficult to find a tint that falls below blocking 30% of visible light. Anything with mirror is definitely out. Fades are also not going to pass, the entire window must be clear.

Why cant a shop pass you? Well, new inspection machines have video camera's but more importantly than that, would you like to loose your job or license over someone else breaking the law? The fines could be horrendous but its possible even greater trouble and hassle could be heading your way, after all asking an officer to break the law is a crime in itself. 

If you had an incident and the police look further into the matter its possible they may account for the time of the last inspection. Officers have told us at this time its not a top priority to go looking for tinted windows, but keep in mind having tints looks great - its a nice attractive appearance for sure! But remember the way an officer feels as he approaches a car with tints. That officer is worried about his family, life, and his career - how would you feel approaching a car you knew was already braking a law with a device designed to conceal the interior or occupants? You would be concerned too and that's the point of the NY tint law - safety.

Our peace officers of NY State are here to help and they do great work, lets do our part to help them and keep the peace.

Nissan Sentra mirror in Middletown ny

Broken mirror in Middletown NY Sunday caused inspection failure. An improperly fitting mirror can cause state to stop your car in the inspection process.

A new mirror is available from Nissan or an aftermarket mirror that is identical for a much lower price than the car dealer.

Great auto repair shops in Middletown NY

Mechanic near me? There are few choices in the area but try this.

-Middletown NY

Near Middletown NY there are few choices for auto repair. When you need brakes, maintenance services, steering, radiator, engine, suspension, electrical, or diagnostic services where can you go that offers you a great overall service?

What to look for when choosing an auto repair center?

Many auto repair centers focus on few things. There are muffler shops who dabble. Brake shops who are limited. Engine or transmission guys who just want the biggest baddest jobs and are not tuned to your needs. But general repair independent shops that also carry tires and offer service and maintenance? These are the guys who are there to help you the most.

Why?

Local independents offer wider variety of experience and services on older and higher mileage vehicles out of the dealer warranty period. These shops also fix many other things, often offer services and repairs such as welding (they even weld lawn mowers sometimes for a neighbor!). So for real one stop shopping where you can have a relationship its worth not having to bounce around.

Why should I have a primary care provider?

Unlike today's medical practices where some put you with a different person each time, you want a dedicated shop for all your repairs. This way the guy knows what they have seen in the past, how things are progressing, how your needs are at this time, and can have a conversation with you. Its more perfect than any other way of buying auto repair. Hey, you are going to need them someday, keep that relationship on an even keel.

Some choices like these below are examples of local people who have great experiences at www.dolsontire.com in Middletown NY and here is why, read on about these drivers 5 star experinces:

Gina

11 weeks ago

Joe went above and beyond. He made sure my vehicle was safe before a long road trip,expedited the parts , and made me feel confident i was getting the best service and pricing . i will be returning ! Thank you

While there is always the possibility people mis understand technical matters or confuse prices its easily resolved by talking and explaining what you wanted instead of loosing your cool. Sometimes you may want a minimal repair and these shops can always offer you a solution with many different parts, levels of warranty and other things that can lower the price or fully restore the system. 

The right way to fix a vehicle if you plan to keep it or even sell it to anyone you may know is to restore a worn system. Some drivers simply cant afford restoration and thats fine too. But restoration has its benefits - much longer warranty, nationwide warranty, and generally perfect performance from the newly restored system. You generally will not have any issues with a restored system for as long as it lasted or more than the first time.

Godwin

20 weeks ago

Great customer service. I'll definitely go back to this place.

So the best advice is pick a local independent mechanic in Middletown NY such as Dolson Auto & Tire who offers a nationwide warranty, zero percent extended financing, stands behind the services, can arrange many options from low cost to best quality, and can adjust to fit your budget and time. Plus each service comes with a free car wash and offers upgrades to interior cleaning so in one stop you can get it all done right and looking good. Where ever you go trust your local certified auto service center and Goodyear National Dealer Network locations. Across the USA offering more coverage at AAA Certified locations such as Dolson Auto & Tire - you can be sure you will have a personal service representative who can resolve any concerns you have with your cars issues.

Lockwood

26 weeks ago

Everyone in the shop is fantastic! Needed new tires and was afraid of the cost (living on a tight budget). Ryan was able to find an affordable option for me and took care of it in no time. Thanks to him, I feel safe and didn't kill my budget. I'll be coming back for anything that my car needs. Great experience! Highly recommend!

Preparing machined gasket surfaces

-by dolsontire.com

When engineers design components for engines, drive line, transmission, or other critical sealed surfaces they calculate how wide, how much pressure, and how the gasket materials used will interact with their design in order to optimize the fitness of the system.

During the repair process many technicians spend a great deal of energy preparing surfaces. It is often the case the uninformed make this serious repair technician error. 

The use of pneumatic tools with abrasives is a well known risk to the longevity of the repair. Lets explore why any casting, whether cast iron, aluminum, alloys, plastics and more may suffer from the overzealous inexperienced hand.

Tools that spin with abrasives on them can remove a great deal of gasket, and most unfortunately metal during the cleaning process. Because these tools are round discs, they are most likely to remove uneven amounts of material. Because they spin around and must be held at an angle they will never be perfectly square with the surface.

Another consideration is the required finish. While its best to look it up in your machinists handbook, a fine texture flat file is a good choice.

Use a chemical to soften the gasket material and clean the surfaces. Then while the chemical is acting, use a plastic scraper or plastic razor blade to remove the old gasket materials without affecting the original surfaces. In extreme cases use the chemical again with a brass brush that will not scratch up the surface to remove stubborn gasket glued to the surface.

Then use the flat file with just a few even pressured light strokes in one direction, then turn 90 degrees and a few more, and so on. Just enough to clean the surface.

When experienced you will see this removes the high spots around bolt bosses where clamping torque can be limited and quickly shows you the low spots if any. Use a machinists straight edge or granite block to check the flatness. If the casting is within specifications you are ready for the next step of assembly. 

If not, you may have to send it to a competent machinist to restore the perfect finish, replace the part, or if you are good enough, flat file more and check the flatness again.

This is how we do it, you may have your preferences. We fixed a few engines over the years where the other shop or dealer tech said he had always used a "whizzer and I never had a problem before!" at least that he knew of. Its an expensive mistake to let a job go with a possible error. The job may run for a while but eventually fails due to the loss of gasket compression. Its worth sending the job to a competent shop or educating yourself and passing the ASE Engine Machinists exams. If you need any assistance in Middletown NY contact us on our web site or watch these videos about engines here engine educational video

--

www.DolsonTire.com A Full Service Repair Work Shop and Tire Center

phone to make an appointment 343-6300

Open 7 Days

Truck hits pole on Dolson ave

A truck hit a pole on Dolson Avenue by Dunkin Donuts. Took out the internet and electricity on much of Dolson Avenue. This caused much destruction this morning businesses have no power no Communications at this time as of 8 a.m. Communications are still down. the truck burst into flames shortly after backing into the pole damaging the electricity and then the air conditioning unit on the truck burst into flames.

Dolson Auto and tire in Middletown NY was without Communications and telephones or down.

EVAP check engine light on, small leak found at Dolson Auto & Tire Middletown NY. We can use various methods and test equipment to pinpoint problems that cause MIL lights (Malfunction Indicator Light) to come on. Commonly called a Check Engine Light (or CEL) this dashboard indicator warns the driver that a problem that may cause damage, high emissions, or other issues is beginning or present and has been detected through various tests or Monitors your vehicle performs while you drive.

These monitors are looking for certain conditions and often they retest and test again until they are pretty sure they have a code. We use things like special tools to access Mode 6 data, PID data, and actual electrical streaming data between components, sensors, oxygen sensors, devices, PCM, ECM, modules, computers and many other devices (there are hundreds of them in modern cars). Since we know how these systems actually work, we can scientifically identify the main causes and interactions and determine the root of the issue, or in the case of some multiple contributing factors or collateral damage.

The environment is a major cause of electrical problems in cars. Winter, salt, acid rain, moisture, and condensation are often creating corrosion on components. Sometimes dirt, oils getting where they should not be, silicone, and even lightning or crossover electrical charges and shorts. We even frequently fix problems caused by mice and rodents.One time a mud wasp next was found on an electrical terminal, we determined the mud even though it was dry was a conductor causing a mild short. Surprisingly we were right! We removed the mud wasp nest cleaned it up and the problem was fixed.

Near Middletown NY you will find a great auto service mechanic team at Dolson Auto & Tire . Check out the web site address at www.dolsontire.com

https://lh3.googleusercontent.com/5MpDGlFTxQEpR2-59AoFHaFH0jPc8kchArq8t2BGC8t9a0hdbp_EEU0p-vrqG-tdky6yA_rqzFESqQ=w1024-h768-k-rw-no

J2534 reflash Chevy

Here we have a Chevrolet TrailBlazer. The customer requests a reflash to update the power train.

Some GM cars and trucks have had driveability issues, codes, and drive train control problems. Owners report poor transmission shifting, 4wd selection, performance, and codes that prevent them from passing inspection.

Here is a short video clip of our reflash by connecting the vehicle to GM's servers and download/upload into the vehicle the latest versions of software.

When completed the instructions require a clear codes and road test. It takes about an hour to do the job.

https://quik.gopro.com/v/nIF52jtXik/

Custom Wheels on Sale now - Chrome Wheels ? Summer is coming!!!

These chrome wheels will not last long in Middletown NY, supply of chrome is low, call to order a set of custom chrome wheels. We offer up to 6 months to pay on account to those who qualify for zero percent interest* see store for details. No fee to apply. Spread your purchases out over 6 payments!

Many FWD front wheel drive, 4 wheel drive, and RWD rear drive wheel applications to fit popular cars and trucks. Call today, dress up your truck or car for summer!
--

www.DolsonTire.com A Full Service Repair Work Shop and Tire Center

phone to make an appointment 343-6300

Open 7 Days

Fwd: Kia service notice

KIA issues notice suggesting owners wash the undercarriage of their cars 

-by Dolson Auto & Tire, Middletown NY

KIA and Hyundai has had some issues with rusty suspension bolts and parts
due to road salts. It is best to keep the undercarriage clean on all new cars.
But what should you do and how often? The attached image 

details some corrective measures KIA and Hyundai dealers may
perform on a recall service bulletin.

Visiting a tunnel car wash where jets mounted in the concrete spray
fresh water and corrosion inhibiting waxes can help. When vehicles are
serviced they should be inspected for rusted brake lines, bolts, and 

suspension parts.

You could also go to your dealer for a free no charge recall. Dont pay for
the service at the dealership, its free. You may be asked to pay for optional
services, its best to simply say give me an estimate and I will 

look into it - this way you can consult with your significant other or bring
the estimate to us for a competitive price on auto repairs.

At Dolson Auto & Tire we provide full service and repairs, extended warranty
repairs for many insurance plans, new tires, and we have a fine car wash next
door. When you think of auto repairs near Middletown NY think of our AAA
Certified Repair Center right on Dolson Ave.

--

www.DolsonTire.com A Full Service Repair Work Shop and Tire Center

phone to make an appointment 343-6300

Open 7 Days